Australian made in Ringwood, VIC since 1977
A roll-out awning annex turns the awning on your caravan into a full extra room. We measure your van and awning. Then our Melbourne factory in Ringwood makes the walls to fit.
Our best seller
It’s a set of walls that turns your roll-out awning into a room. The awning you already have is the roof. We add three canvas walls, an anti-flap kit and as many curved rafters as you want. We make each wall on its own, so you can put up one for shade or all three for a full room.
Tap how you usually camp.
The awning and a wall or two might be all you use.
A roll-out awning annex suits stays of a week to two months.
If you're staying longer than a month or two, or living on site, a full annex is the better fit. See full canvas annexes
How long are you staying?

A roll-out awning annex is our best seller. The awning you already have is the roof, and you can put up one wall or all three. Once you're used to it, it goes up in 30 to 45 minutes. It's also strong when it's fully set up.

A full annex has its own canvas roof and a full pole frame, and it doesn't use the roll-out awning at all. It takes 1 to 2 hours to set up and is the stronger of the two. It's built to stay up for months, sometimes for good.
About 2 weeks after your Kilsyth fit and measure. Tap through the steps.

We usually reply within 24 hours.

We get in touch to answer questions and confirm your options.

At Kilsyth, we fit the rope track and brackets, then measure your van and awning.

In our Ringwood factory.

You pick it up from Ringwood, or we freight it to you.
Tap where you are.
If you can, bring it to Kilsyth. That's where we fit your track and brackets and measure your van, all in one visit. Can't get there? Anywhere in Victoria, we can come to you for a call-out fee.
Our partner service providers can fit the track and measure your van. Most are in NSW, Tasmania and Queensland. You can also get a fitting kit from us and do it yourself.
We then freight the finished annex anywhere in Australia. If you're on the road, we can send it to a caravan park. We quote freight for each job, based on the package size and where it's going.
You can get a fitting kit from us and do it yourself. Our fitter can talk you through the measurements on a phone call.
We then freight the finished annex anywhere in Australia. If you're on the road, we can send it to a caravan park. We quote freight for each job, based on the package size and where it's going.
Yes. We make every annex to order. It can suit any awning, any van and any common rail size on caravans and other RVs. At our Kilsyth facility we fit the rope track and brackets to your van, then measure the van and awning. We make the walls to those measurements in our Ringwood factory.
Yes. You have three options:

Mesh at the vent end so fumes can escape, and canvas at the other end.

Either all mesh, or about 90% mesh with canvas borders.

First, have the gas disconnected. Then bring the compliance paperwork when you order and sign our acknowledgement form.
We make walls for electric awnings too. They use a support and attachment system built for them.
Every standard annex includes an anti-flap kit, a draught skirt and storage bags. Tap a part to see what it does.
In every standard annex
Options you can add

The walls attach to the anti-flap kit, and it seals the gap between the awning and the walls. With the walls off, it still holds the awning steady in strong wind.

Every standard annex includes one. Our setup video shows you how it goes on. Watch the video

It usually weighs 20 to 30kg. It comes in storage bags, and the biggest bags are about the size of a mini fridge.

We fit the rope track and brackets to your van at our Kilsyth facility.

Curved roof rafters are optional. They stop the awning sagging or pooling water, which can stretch the vinyl and damage your roof. You can add as many as you like.

We usually make floors from rubber mesh or Canvicon, a tarpaulin-like material. If you'd rather have something else, we can make one from any material you like. Park rules on floor matting differ, so check with the park when you book.

You can add another door, more windows, extra-large windows or an alfresco long wall. You choose where everything goes, and we go through the layout with you before we make anything.
Slide to your awning size
1 door and 2 windows
Not sure of your awning size? Pick "Other/Unsure" on the form and tell us your van model.
Order them online and have them delivered.
Walls come in canvas or shade mesh, and you choose the colours from a wide range of designs. You can also add clear window protectors. Tap a wall to see it.

8oz treated canvas, made in Australia by our supplier, Defab. The canvas handles hot days and cold nights well.

Shade mesh walls, in the colours you choose.
Yes. We use supaproof 8 canvas, and Defab’s DDP process impregnates it with waterproofing. The fabric has a water resistance rating of 30kPa and passes the cone leakage test.
It’s also highly breathable, and it resists UV, mould, algae and tearing. Shrinkage stays under 2%. Defab guarantees the fabric for 5 years.
Four quick questions, based on how you travel. You'll get a short list to bring to your quote.
Question 1 of 4
Question 2 of 4
Question 3 of 4
Question 4 of 4
One person can do it, though two is ideal. Once you're used to it, it takes 30 to 45 minutes, and an hour at most. Our setup videos walk you through the walls, the anti-flap kit, the draught skirt and packing it all away.
Usually 20 to 30kg. It comes in storage bags, and the biggest bags are about the size of a mini fridge.
The price depends on the size of your awning and the options you pick, so every annex gets its own quote. Quotes are free with no obligation, and we usually reply within 24 hours.
Some other annex makers that claim “Australian Made” aren’t telling the full truth. Alpine Annexes builds your annex from start to finish, in Melbourne. That’s why we can offer so many options. Some annex makers use imported pre-made walls that are then cut down to fit your awning. This can limit the optionality they have with their layouts. Because all our products start as a roll of material, we can put whatever you want, wherever you want. And with over 11 decades of experience on our team, we know how to make your camping dream come to life.
Tell us these five things. Tap each one to see more.
We make every annex to order. It can suit any van and any common rail size on caravans and other RVs.
This gets your quote started. The walls are made to the measurements taken from your van and awning.
The price depends on the size of your awning and the options you pick. Size also sets the standard layout:
Not sure of your awning size? Pick "Other/Unsure" on the form and tell us your van model.
If your fridge or gas vents are on the awning side, you can still have an annex. You have three options:
The walls attach to the anti-flap kit, and it seals the gap between the awning and the walls. With the walls off, it still holds the awning steady in strong wind.
Every standard annex includes one, so tell us if your van already has a kit.
You can change the layout or add to it:
You choose where everything goes, and we go through the layout with you before we make anything.
All our work comes with a 12-month warranty and lifetime user support. You can call us whenever you need help with your annex.
We fit the track and brackets and measure your van ourselves, so getting the fit right is our job.
If you measured your van yourself and it doesn't fit, send it back to us and we'll alter it. Depending on how big the changes are, there may be a charge, but a lot of the time there isn't.
If you'd like to see the finished annex on your van before you take it home, ask us for a test-fit.
Also for your awning
Our safety enclosure hangs from the same awning and anti-flap kit.
We can replace the vinyl on its own, for all brands of roll-out awning.
Tell us about your van and awning, and we’ll come back with a quote, usually within 24 hours. Prefer to talk? Call the factory on (03) 9870 6102, Monday to Friday, 8am to 4pm.